Mini Cooper Tail Lights EU Union Jack LED 2001-2006 | VLAND EU
Total Price
Ships within 24h
MINI Cooper Tail Lights Price
These after-market replacement parts are E-approved and bear the official UN-ECE type-approval mark (E-mark). This makes them road-legal throughout the EU/EEA and the UK, and they are recognised at TÜV/HU inspections in Germany. They are not original equipment. Under Article 110(1) of Regulation (EC) No 6/2002 they may be used to replace or restore the appearance of the vehicle. Any manufacturers’ trade marks and original reference numbers are shown solely for technical identification of vehicle fitment. All trade marks remain the property of their respective owners. Install and use only as intended and in compliance with all applicable regulations.
Product Information
VLAND Mini Cooper R50/R52/R53 Union Jack LED Tail Lights (EU) 2001–2006 — E-Mark, Sequential, Plug-and-Play
OEM-style full-LED Union Jack tail lights for Mini Cooper R50 (Hatch), R52 (Convertible), and R53 (Hardtop), model years 2001–2006. Red LED running/brake, amber sequential indicators, white LED reverse, and a dynamic start-up (breathing) animation. Plug-and-play with factory connectors. E-mark certified for EU road use. 1-year manufacturer warranty from purchase date.
Why you’ll love these
- Full LED for running, brake, turn, and reverse — no bulbs required.
- Union Jack signature with switchable start-up animation.
- Amber sequential rear turn signals for clear, modern signaling.
- OEM-style fit: uses factory mounts and plugs — no splicing.
- E-mark approval for EU road use.
Exact fitment
- Platforms: Mini Cooper R50, R52 Convertible, R53 — 2001–2006.
- Lens options: Red or Clear.
- OE references (examples): 63217166955, 63217166956, 63216933273, 63216933274.
What’s in the box
- 1 × Left (driver) LED tail light
- 1 × Right (passenger) LED tail light
- User manual
Install & wiring (plug-and-play)
- Remove OE lamps using factory fasteners; transfer clips/grommets if needed.
- Connect the OE multi-pin plugs to each VLAND lamp and seat the housings.
- Function check: running (red LED), brake (red LED), turn (amber sequential), reverse (white LED).
- Optional: enable/disable start-up animation via the small ON/OFF lead on the rear harness (labelled).
- Verify panel gaps, then torque fasteners to spec.
Styles & finish
- Lens: Red or Clear.
- Signature: Union Jack LED pattern with welcome/breathing effect.
- Signal color: Amber sequential turn indicators.
- Housing/Lens materials: Black PP housing / Clear PC lens.
Tech specs
| Product type | LED Tail Lights (pair) |
|---|---|
| Ingress | IP67 sealed |
| Voltage | 12 V |
| Certification | E-mark (EU) |
| Warranty | 1 year from purchase date |
FAQs
Do I need bulbs? No — these assemblies are full LED.
Is coding required? Typically no on stock vehicles. If a bulb-check warning appears, an inline decoder usually resolves it.